| |
|
 |
 |
 |
|
|
The depth of your vanity top is the front-to-back dimension of the countertop. When measuring your
cabinet, do not forget to add additional length to allow for overhang, if required. Standard Vanity
Tops are 22” deep. For other depths, please see our Custom Vanities section.
|
 |
 |
 |
|
|
|
|
 |
 |
|
|
The length of your vanity top is the left-to-right measurement of the countertop. When measuring your
cabinet, do not forget to add additional length to allow for overhang, if required. Standard Vanity
tops come in lengths of 25”,31”, 37”, 49” and 61”. If your vanity top is any other length, please
see our Custom Vanities section.
|
 |
 |
 |
|
|
|
|
|
|
|
|
All vanity tops are shipped with a 4” tall backsplash included. The backsplash is finished with a
straight polish edge on three sides and is the length of the vanity top. For more information on
attaching the backsplash, please see our installation instructions.
|
 |
|
|
|
|
|
|
|
|
|
|
All vanity tops are available with optional sidesplashes. The sidesplashes are the depth of the
vanity top minus the front edge detail and minus an additional ¾” to allow for the backsplash.
The sidesplashes are polished on three edges with a straight-polish edge. For more information
on attaching the sidesplashes please see our installation instructions.
|
 |
|
|
|
|
|
|
|
|
|
Standard Size vanity tops are available with 3 faucet holes in an 8" spread.
Custom size vanity tops are available with the following faucet hole options:
|
| Single hole: |
|
 |
| Triple hole 4” Spread: |
|
 |
| Triple hole 8” Spread straight: |
|
 |
| Triple hole 8” contour: |
|
 |
|
|
|
|
|
|
|
|
|
|
| No Sink: All custom vanity tops have the option of being ordered without a sink cutout. |
|
 |
|
| One Sink: All vanity tops have the option to have one sink or sink cutout. Custom Vanity tops have the additional option of having your sink cutout at a custom location on the top. |
|
 |
|
| Two Sinks: Two sink or sink cutouts outs are available on every vanity top 61” in length and up. Custom Vanities have the additional options of having you select a custom location of your sinks or sink cut-outs. |
|
 |
|
|
|
|
|
|
|
|
|
|
|
With the Custom Vanity Program, you can select the location of your sink or sink cutout. To select the
location of the sink, or sink cutout, measure from the right side of the vanity top to the center of
the sink:
|
 |
|
|
|
|
|
